Infrared heater – Item 3546
So far, in the automotive industry, the use of structural adhesives for fitting parts of various materials that make up the chassis and the body of a vehicle has led to long and hard removal interventions thus entailing risks of possible damages of other contiguous parts. However, the INFRARED HEATER 3546 makes the whole process EASY, FAST and CHEAP.
Through the heater 3546, today TECNA introduces an innovative removing process by means of infrared heating. It is a fast and clean process. It does not affect the parts in contact with the damaged part and it drastically reduces the time required to restore the vehicle.
TECNA has chosen to use the infrared radiation to ensure a safe process for the user’s health; no electromagnetic fields are generated, as in the case of traditional induction heaters.
In addition, the peculiar water-cooling of the tool allows using it comfortably even for prolonged periods without involving overheating issues. Unlike induction heating, the use of infrared radiation allows operating on any type of material:
- Carbon fiber
The heat generated by the infrared source 3546 is also used in the inverse process, meaning the bonding of the new part, thus allowing to greatly reduce the time of polymerization of the glue, and therefore the vehicle repair.
AREAS OF USE OF THE INFRARED HEATER
- Automotive, bicycle and motorcycle industry;
- Repair after-market area, body shops, damaged body shells and chassis, customizations;
- Elaboration of racing cars;
- Elaboration of recreational vehicles;
- Parts and equipment made out of technopolymer and composite materials (Kevlar, carbon fiber, fiberglass);
- Boating, wood, plastic and components industry involving joints glued on non-homogeneous materials (metals, alloys, glass, ceramics, technopolymer);
- Aviation industry;
- Sport items and pieces of equipment.
Il controllo touch a colori del 3546 consente all’operatore di eseguire il riscaldamento a temperatura controllata definendo i parametri di temperatura che deve raggiungere il pezzo e la potenza da erogare durante il riscaldamento. Consente inoltre di programmare una curva di riscaldamento per la polimerizzazione della colla, in cinque fasi, che possono essere inquadrate in parametri quali: durata, temperatura e potenza di riscaldamento.
Il 3546 è dotato di interfaccia USB per il trasferimento di file o aggiornamenti, tra cui parametri preimpostati per le diverse modalità di lavoro, riducendo così i tempi di configurazione a vantaggio della produttività.
The infrared heater 3546 relies on the focusing of the infrared radiation so as to realize a rapid and localized heating of the adhesive which glues the part to be removed thus enabling an easy and safe detachment.
The speed of the heating process also allows limiting the diffusion of the heat to other parts connected to that on which one is working thus preventing from altering glues and paints, which do not need to be affected by the repair process.
The heating tool of the 3546 is provided with a no-contact temperature sensor, which allows modulating the power of the heating tool to keep the temperature constant.
Portable tools, liquid and air-cooled, having variable shapes and powers to suit specific operating requirements.
|1.5 kW||2.5 kW||4.8 kW||8 kW|
Articolo 8680/IR/01 – Portable probe for the calibration of the heater on the surface to be treated.
Split glued layers with mechanical methods and with infrared heater 3546.
Split, in multiple layers, the glued upper element without affecting the sealing and the bonding entirety of the lower layers.
Split glued layers of non-homogeneous materials, without damaging the single layers.
Remove moisture from the surfaces to be bonded with polyvinyl acetate adhesives.
Bring items made out of thermoplastic synthetic material to a plastic state in a localized way.
Along their production cycle, these items are meant to be shaped, bent, stretched and deformed permanently.
Speed up the drying or the polymerization process on parts glued with curing adhesives.